Original Original LCD Screen and Digitizer Assembly For Sony Xperia 10 II

about the bgt product
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Sony Xperia 10 II
2. Replace the old broken cracked damaged one.
3. Make your device look more refreshing than ever.
4. Fight fully and work.
5. Each item has been checked and in good condition before shipment.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Before bgt installation notes
Tips 1: Test before installation
When testing do not remove any protective film or labels. Please pay attention to the problem of static electricity.
Before attempting any repair make sure you have yourself an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components inside the phone.
Be sure to wear eye protection and be careful not to cut your finger on the glass splinters.
Tips 2: Simulate the tests
Screen replacement is a very fragile product. We strongly suggest testing before installation. Simulate testing which means a mobile phone (motherboard + LCD or screen) Audio cable connected and new replacement power on test finished. If it tests OK please install it. If you can't show please contact us at the first time. And please don't force it to install on mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not double wire
Please make sure the LCD cable is not bent. More than 90 degrees bent will cause a black screen.
Although a set of tools appears in the image, these will not be included unless expressly requested through message. In which case they will be provided free of charge.