EDUP 9633-800 AC1900Mbps 2.4GHz and 5GHz Dual Band PCI-Express Adapter External Network Card with 4 Antennas

1. Interface: PCI-Express.
2. Antenna: 4x5dBi 0mni directional detachable antenna.
3. Standard: IEEE 802.11ac IEEE 802.11a IEEE 802.11n IEEE 802.11g IEEE 802.11b.
4. Frequency: 5.180-5.240 GHz 5.745-5.825 GHz / 2.4 GHz - 2.484 GHz.
5. Rate: 5GHz: 11ac: up to 1300Mbps (dynamic) 2.4GHz: 11n: up to 600Mbps (dynamic).
6. 5GHz receive sensitivity: 11 to 6Mbps: -85dBm. 11 to 54Mbps: -68dBm. 11ac HT20: -59dBm. 11ac HT40: -54dBm. 11ac HT80: -51dBm.
7. 2.4GHz receive sensitivity: 11b 11Mbps: -80dBm. 11g 54Mbps: -68dBm. 11n HT20: -64dBm. 11n HT40: -61dBm.
8. Transmit power: less than 20dBm (EIRP).
9. Wireless mode: Ad-Hoc / Infrastructure mode.
10. Security: Support 64/128-bit WPA-PSK/WPA2-PSK 802.1x WEP.
11. Modulation: DBPSK DQPSK CCK OFDM 16-QAM 64-QAM 256-QAM.
12. OS support: Windows 10 Windows 8.1 Windows 8 Windows 7 Windows XP.
13. Working temperature: 0-40 degrees Celsius.
14. Storage temperature: -40-70 degrees Celsius.
15. Operating humidity: 10% to 90% non-condensing.
16. Storage Humidity: 5 to 90 percent non-condensing.

Follow these steps to insert the adapter into your computer:
1. Turn off your computer and plug in the power cord and other connected peripherals to your computer.
2. Remove the panel from the outer casing. Locate the available PCl-E slot and remove the slot cover.
3. Carefully insert the adapter into the PCl-E slot and secure it with the captive screws.
4. Replace the panel casing.
5. Install the antenna.
6. Reconnect the power cord and turn on the computer.